Shop
HC-SR501 PIR Motion Sensor For UNO, Raspberry Pi, STM, ARM, AVR, PIC, 8051
₹75.00Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be Adjusted*Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Range: <140°*Detection Distance: 3 to 10m (can be adjusted) Delay Time: 5 to 200s
HDMI Female to Mini HDMI Male Adapter
₹70.00The HDMI Female to Mini HDMI Male Adapter eliminates the need for multiple cables and clutter. It is a cost-effective way of connecting HDMI Mini-enabled devices to standard HDMI ports. The HDMI Female to Mini HDMI Male Adapter adapts an HDMI cable to fit into a Mini HDMI port on a laptop, camcorder, camera, or tablet.
HDMI to HDMI Cable
₹150.00This is HDMI to HDMI Cable, which Supports Ethernet, 3D, 4K video, and Audio Return Channel (ARC). You can easily Connect Blu-ray players, Fire TV, Apple TV, PS4, PS3, Xbox One, Xbox 360, computers, and other HDMI-enabled devices to TVs, displays, A/V receivers, and more. This Cable allows you to share an Internet connection among multiple devices without the need for a separate Ethernet cable. It Meets HDMI 2.0 standards (4K Video at 60 Hz, 2160p, 48 bit/px color depth) that support bandwidth up to 18Gbps and is backward compatible with earlier versions.
Hot Melt Glue Gun – 40W with Hot Melt Glue Stick (Pack of 3)
₹345.00Glue gun are a portable devices that utilizes and dispense hot melted adhesives in shape of tubular sticks. The heat generated from the heating element melts the adhesive and let it flow to the nozzle by pulling the trigger. They utilizes and dispense hot melted adhesives in shape of tubular sticks.
I2C Bi-Directional logic Level Converter- 4 Channel
₹35.00
I2C Module for 16×2 (1602) Character LCD
₹65.00I2C Module has a inbuilt PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display.
These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on the underside of the module. If there a 3 sets of pads labelled A0, A1, & A2 then the default address will be 0x3F. If there are no pads the default address will be 0x27.
The module has a contrast adjustment pot on the underside of the display. This may require adjusting for the screen to display text correctly.
Industrial Grade Analog PH Sensor Kit for Arduino
₹1,730.00Module power supply: 5 VDC.
Measuring temperature: 0-50 ℃.
Response time: ≤ 1min.
pH sensor with BNC connector.
Gain adjustment Potentiometer.
Power indicator LED
IR 5mm Photodiode RX (Infrared Receiver)
₹7.00IR 5mm Photodiode RX (Infrared Receiver).
Power Dissipation Pd: 100mW
IR Sensor Module – LM393 Photoelectric Sensor Module
₹38.00Photoelectric sensor module is a sensor module which you can use to identify the distance between obstacles, identifying changes in surroundings etc. applications. It has an IR transmitter, IR Receiver, LM393 and a potentiometer to set a threshold for digital output. When light brightness of ambient is less than the set threshold, DO-side output is high, when light brightness of ambient is over the threshold, DO-ended output is low. This module can be used in obstacle detection in autonomous robots and cars, in positional feedback for control system, industrial safety system, Wheel encoder etc.
L293D Motor Driver Shield for Arduino Uno and Mega2560
₹145.00Can drive 4 dc motors or 2 stepper motors or 2 servo.*Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.*4 h-bridges: Per bridge provides 0.6a (1.2a peak current) with thermal protection, can run motors on 4.5v to 36v dc.*Up to 4 bi-directional dc motors with individual 8-bit speed selection and 2 external terminal power interface, for separate logic/motor supplies
L298N 2A Motor Driver Module with PWM Control
₹115.00A microcontroller that normally operates on 5V or 3.3V cannot be directly used to control a DC motor operating on higher voltage and current rating. This is why we commonly use Motor Driver modules like the L293D Motor Driver Module and the L298N Motor Driver Module. While the L293D motor driver module can be used for basic low current application the L298N Motor driver module is a high current motor driver with some additional features that are commonly used with Arduino and Raspberry Pi for Robotics applications.
Laser Module of Red Color & 650nm(5 Pieces)
₹179.00Output Power: 5mW; Wavelength: 650nm*Working temperature: -10°C to +40°C; Housing material: High quality Copper*Dimensions: 6.5 x 18mm; Wire connection: Red wire connect to Positive, Blue wire connect to Negative*
LDR – 5mm Light Dependent Resistor
₹6.00LDR – 5mm Light Dependent Resistor. The sensor works best in both Light and dark region.
Line Follower (LFR) Programmable Robotic DIY Kit
₹650.00On Board ATmega8 microcontroller Board with Bootloader Software, L293D & On Board L293D Motor Driving Circuit, 4 LED for output,*23 Pin breakout are available for outside device interfacing, On board voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit.*No Separate Programmer required for board, it can easily program by USB Communication using Bootloader mode, Specially Designed Bootloader Mode that run on 12MHz by using BOOT Button on board*Wireless Controlled Robot by Bluetooth, Wireless Controlled Robot by Radio Frequency (RF) Module, Mobile Controlled Robot by DTMF Technology, PC (Keyboard) Controlled Robot, Line Follower Robot, Wall Follower Robot, Grid Solver Robot, Maze Solver Robot, Sumo Robot, Hand Gesture Robot, Edge Avoider Robot, Obstacle Avoider Robot, Never Fallen Robot, Autonomous Robot, Joystick Controlled Robot, Free Moving Robot & many more……
Male Berg Strip Breakable Header Pin 1×40 (2 Pieces)
₹22.001×40 M/F Header Berg Strip for Project applications to connect different terminals. It Can be used and soldered in Vero or Zero PCB Boards and other applicable components. Also, it can be connected to breadboards.
Male to Female Jumper Wires Strip of 40 Wires
₹62.00It is high quality & reliable breadboard jumper cable, which is used in many applications for experimental purpose & learning boards, It is copper wires which used for connection between terminals & devices.
Male to Male Jumper Wires Strip of 40 Wires
₹64.00It is high quality & reliable breadboard jumper cable, which is used in many applications for experimental purpose & learning boards
